Saturday, December 14, 2013

Shades of darken sky

Sunday, March 17, 2013

Over-sized 2x12 guitar cab


 I Finally got around to building the 2x12 half cab that I had been thinking about for about half a year.  I used a 3/4inch birch ply wood and finished with an ebony stain and linseed finish

Dimensions:
19-1/2 (H) x 32-1/8 (W) x 16- (D)
Specs:
8ohms @ 160w rms 








Tuesday, September 25, 2012

C'est Malonnete

Acrylic and paper on 18x 24 stretched canvas

Wednesday, September 5, 2012

Of The Mountains




I recently helped Of The Mountains design and print their first T-shirt. This blues/folk/jam band is defiantly worth checking out. You wont be sorry





















Facebook : http://www.facebook.com/OfTheMountains

Soundcloud:
http://soundcloud.com/ofthemountains



Saturday, August 4, 2012

so hear me out

Today, I Drew the outline transparencies for my next two prints. The one on the left is on 4 taped 11 1/2 x 8inch transparent sheets, the corresponding is on a sheet of poly methyl. Both Are drawn with dry erase markers.

Wednesday, August 1, 2012

4 layer screen printing press, Revisit

I  got around to modifying my printing press that was built a year ago. Upon first print I discovered a few minor flaws in my design. I Stuck with the same over all concept, Keeping the castors, I added 1x2's to the exterior for a little more support



Replacing the inaccurate 2x4 arms with  2x2 aluminum tubing ,that was cut to the 1000 of an inch at a machine shop is a more light weight and extremely accurate  alternative.  finding a square chunk of steel for the top of the base, helped prevent the Eye hooks from rotating when the arms were pressed down. Also Moving the location of the springs from the side of the arm to the brace of the screen increased the tension,  preventing the screens from flopping down when rotated.

Four Sets of wheels guide the arm into place, giving it an  accuracy withing 1/100th of an inch.. Last but not least, I added a coat of black paint, to make it look classy as fuck. Over all cost was around 70 bucks, Sure does beat the price of around a grand for something mass produced.